Skip to content

The Shoreham

Pictured here in lightly antiqued silver with Venetian mirror inserts and a low iron bevel mirror.

Frame Reference: PW7010/complete Shoreham Mirror
Frame Profile Dimensions: 110mm wide x 60mm deep
Finish Customisation: Can be finished in all our standard finishes
Mirror Options: Low-iron, plain and antiqued mirror panels, with or without a bevel
Size: Made to order in any size

    Finishes

    Available in all Patrick Ireland finishes or any bespoke finish. Click here to explore our finishes, or contact us to discuss a besoke finish.

    Glazing

    The majority of our glazing is done with standard float glass, but we also work with specialist glass, high performance glass, which provide different levels of clarity and UV protection, depending on your needs.

    If you are not sure what glass you require, get in touch and we can advise accordingly.

    Ordering Information

    All orders are made completely bespoke from start to finish and currently take approximately 6-8 weeks. Please get in touch to place an order or to discuss your requirements.

    Frame Cross Section

    A representation of the shape of this frame profile.

    Care and Maintenance Instructions

    Please note that the care instructions detailed below are suggestions only and we are not responsible for any damage incurred whilst cleaning.

    Timber Frame Finishes & Lacquered Metal Frames
    For regular cleaning, we recommend lightly using a dry, soft cloth or feather duster on the frames. For any finger prints and other marks, try using a clean, water-damp cloth and gently rubbing the area.

    Do not use any chemicals, furniture polishes or abrasives on the frames as these will damage the finish.

    Lacquer Finishes
    For regular cleaning, we recommend lightly using a dry, soft cloth or feather duster on the frames. For any finger prints and other marks, try using a clean, water-damp cloth and gently rubbing the area.

    Do not expose the finish to direct sunlight as this will damage the finish over time.

    Unlacquered Metal Frames
    For regular cleaning, we recommend lightly using a dry, soft cloth or feather duster on the frames. For any finger prints and other marks, try using a clean, water-damp cloth and gently rubbing the area. Once the blemish has gone, dry the frame immediately as leaving any wet on the frame will cause damage.

    Mirror & Standard Glass
    Clean and polish using any regular preparatory glass cleaner using a clean, soft, lint free cloth. Avoid getting glass cleaner on the frames.

    TruVue Anti-reflective Glass
    TruVue recommends using a micro-fiber cloth.

    Spray a small amount of ammonia-free cleaner onto the cloth. Spraying on the cloth will prevent overspray. Press the cloth against the glass and clean in round, circular motions

    Handling & Moving
    Whilst our frames and mirrors are made to last, they need to be handled with care. Frames made from timber can dent if knocked and we suggest they are kept in their original protective packaging until they are hung.

    Always lift our frames and mirrors with two hands (or two people) to move them. If they are dragged this will damage the frame and finish.

    Never lie frames face down on any kind of surface as this can damage the finish.

    How It Works

    Expert Craftsmanship

    Made and finished by hand

    We design, make, and finish all our frames in-house at our workshop. Each frame starts life as a plain timber moulding, before being built to the desired size and prepared for its bespoke finish. We prime most finishes with gesso to create a smooth base, giving our frames a seamless, uninterrupted finish, even at the mitred corners.

    We finish our frames by hand and offer an impressive number of finishes, including classic waxed timber, high-gloss lacquer, metal leaf and gilded options.

    Sustainability

    Timber sourced from sustainable forests

    In a continued effort to minimise our impact on the environment, we only work timber suppliers who can guarantee that our timber has been produced sustainably.

    We also work with Carma to improve our social and environmental impact by planting a tree on your behalf for every new order placed. Carma collaborates with the Green Task Force, which works with veterans and is responsible for planting more than 3 million trees in and around the UK. Track our tree planting here.

    Where possible, we use recyclable and recycled packaging materials for our frames and mirrors. The sustainable packaging options have improved over recent years, but we continually strive to improve our packaging and welcome suggestions and product recommendations.

    Search

    Shopping Cart